MOLLE Panels

A MOLLE panel provides a pattern of slots for attaching compatible pouches, straps and equipment holders. It turns wall space into accessible storage without needing a separate cupboard for every item.

You can rearrange your storage as the equipment you carry changes, keeping frequently used kit within reach.

Our MOLLE panels are made from powder-coated aluminium, providing a lightweight mounting surface for compatible storage pouches, straps and equipment holders.

The powder-coated finish protects the surface. Use suitable fixings and avoid dragging sharp equipment across it to help prevent scratches.

The panel is listed for VW Crafter and MAN TGE models from 2018 onwards, with MWB and LWB options.

Select the correct vehicle version. For a 2017-registered van or an already converted vehicle, send us your registration number and photos of the intended mounting area before ordering.

The published dimensions are:

Small: 1,283mm long × 635mm high, listed for MWB and LWB Crafter/MAN TGE.

Large: 1,730mm long × 635mm high, listed for LWB Crafter/MAN TGE.

Measure the available space and allow clearance for loaded pouches, bed frames and doors. Confirm suitability before selecting a combination not covered by these dimensions.

The Crafter/MAN TGE panel is designed to use existing vehicle panel holes, with no new drilling required for the intended mounting arrangement.

Existing lining or furniture may conceal those points. Confirm access before installation and use the specified vehicle mounting points rather than attaching a loaded panel only to decorative wall lining.

The product listing specifies fitting on either the nearside or offside of the van.

Your conversion layout still needs checking. Look for interference with wiring, plumbing, furniture and moving doors, and allow enough space behind the panel for the intended attachments.

The box includes one MOLLE panel and a fitting kit with bolts, spacers and washers.

L-track spring ring mounts are not included. Do not assume pouches, tools or other equipment shown in photographs are supplied unless the selected listing expressly includes them.

Typical uses include first-aid pouches, torches, tool holders and water-bottle pouches. Choose straps or brackets that match both the panel slots and the equipment.

Secure each item against movement while driving. Heavy or rigid equipment needs an appropriate mounting system; a loose strap through a slot is not suitable for every load.

The panel is listed as compatible with standard MOLLE and PALS accessories.

Check your pouch’s strap width, attachment spacing and required clearance. Follow the accessory maker’s threading instructions and check that straps are fully secured before travelling.

No numerical load rating is published in the panel specification. Contact us with the weight and mounting method of your proposed equipment before attaching heavy items.

The safe load depends on the panel, fixings, vehicle mounting points and accessory brackets together. Keep heavier equipment low and distribute it across suitable mounting points.

Yes, if the correct mounting points remain accessible and there is enough clearance. You may need to remove or adapt existing lining to reach them.

Send us photos and measurements before ordering. Check both the empty panel’s footprint and the space occupied by the equipment you plan to carry.

This Crafter/MAN TGE storage panel is described for interior wall mounting. Do not assume it can replace an exterior rear-carrier panel or use the same fixings.

For outdoor storage, confirm that the panel, brackets and accessories are specified for that location and exposure before buying.

Yes. We offer free UK shipping on orders over £100. For orders of £100 or less, the applicable shipping charge is shown at checkout.

If you need a panel for a scheduled conversion or fitting appointment, contact us to confirm the current dispatch estimate for your selected version.

Built for adventure. Backed by Play Dirty. Our eligible own-brand products come with a 3-year product warranty, a 5-year finish warranty and a 30-day fit guarantee—giving you confidence in what you buy and support if something goes wrong.

3-Year Product Warranty: If an eligible product fails due to a material or manufacturing defect within three years, we’ll repair or replace it free of charge, including the necessary carriage costs.

5-Year Finish Warranty: Covered exterior products are protected against rust, peeling and coating failure caused by manufacturing defects for five years. We’ll refinish or replace the affected component. Accidental damage, stone chips and normal wear are excluded. This exterior finish cover does not automatically apply to an interior MOLLE panel.

30-Day Fit Guarantee: Get your fit confirmed by us before ordering. If an eligible product doesn’t fit the vehicle we approved, let us know within 30 days of delivery. We’ll cover return carriage and arrange the correct replacement or a refund.

Applies to eligible products. Third-party pouches and accessories come with their own manufacturer warranty. Full terms and exclusions apply. Your statutory rights are unaffected.